DeviceNet Bus P 3010 - 30 V

Application

This DeviceNet cable for flexible installation with a PUR jacket is designed to operate on 2 CAN RS 485 connection systems - Modbus. Standard DeviceNet regulations require a cable with two shielded pairs and two different connections types, Trunk and Drop, for data transmission and devices supply. 

Construction

Conductor

Bare copper according to CEI EN 60228 (CEI 20-29) class 6

Insulation

Power - AWG 15 el. AWG 22: Polyolefin
Signal - AWG 18 el. AWG 24: Foam polyolefin

Conductor color

Power - AWG 15 el. AWG 22: Red and black
Signal - AWG 18 el. AWG 24: Light blue and white

Screen

Tinned copper wire braid.
Coverage above 85%.
Pair screening: Semiconductor tape on each pair and common drain wire

Outer sheath

PUR according to UL 1581. C22.2 n210 and EN50363-10-2.
Colour: violet RAL 4001

Technical data

Working temperature

Fixed installation: -40oC to +80oC
Flexible installation: -30oC to +80oC

Rated voltage

30 V

Test voltage

1000 V

Bend radius

Fixed installation: 5 x cable diameter
Flexible installation: 10 x cable diameter

Approvals

CEI EN 60228, UL 1581, UL 758, EN 50363-10-2, UL 1581, FT-1 CSA test C.22.2 nr. 210, IEC CEI EN 60332-1, ≤0,5% IEC 60754, CEI EN 50267-2, DESINA registered, UL/CSA registered: 80 oC 1000V style 21576, CE
Abrasion resistant
Bending radius 5 x cable diameter
Electromagnetically protected
Flame retardant acc. to IEC 60332-1
Low emission of corrosive gases acc. to IEC 60754
Max. working temp. +80° C
Min. working temperature -40° C
Oil resistant
Suitable for cable chains
Water resistant
SKU EAN Dimension (mm) Current Value (A) Winding Diameter (mm)* Weight (kg/km)*
783015002 5704403185122 (2xAWG18)+(2xAWG15) TRUNK - D./Cut 11,8 200,5
783015004 5704403185139 (2xAWG24)+(2xAWG22) DROP - D./Cut 6,9 75,0